Energy Products

Starting March 15th, Tesla Forums will become read only. To continue the conversation with the Tesla community visit engage.tesla.com.

Tesla Energy app Powerwall 2.0 STRANGE energy peaks up to 9.8KWH when no one is home

Hello, I'm on my 3rd week of activated Solar and Powerwall 2.0

I have 16 Panels on the roof and 1 PowerWall 2.0

When using the Android Tesla app to monitor power flow, when I click on my home icon to view home energy draw/requirement I see HUGE pulsing spikes up to 9.4KWH with very short durations.

Is there a problem with the monitoring equipment?

Basically I do not see the Powerwall, the solar panels, OR the PG&E grid supplying any power to fulfill the requirement that house says it is drawing. This leads me to believe there is a measurement error in the hardware.

after looking at this for 2 weeks the high pulse trend seems to follow the solar production curve, but extends way beyond what my solar or Powerwall can deliver >9.4KWH and the utility is clearly not filling it up due to the graph I see from Grid usage.

it seems like it can be 3 things:
1. app has a bug
2. inverter hardware has an error or malfunction ?
3. My house has an AC problem, shorting etc ?? seems unlikely because the 3 power sources are not actually supplying anything close to the 9.4KWH demand that is being shown in the app.

here are some app screenshots I have taken

https://photos.app.goo.gl/CdF6yFYWbmRjvmER2
https://photos.app.goo.gl/aupx4bfkX4TYdoar8

https://photos.google.com/share/AF1QipOBOfRKuf9ggyR10oxNCGbXnw7HCV3kmI5CcsITImJ7Wtulbd4brp_O1HjoGhPkDg?key=ME5MbjZtT0l6dldBcjlzZzlFNTJlbXh4Vl91dF9R
https://photos.app.goo.gl/UxX62NUEOCSNOEem1
https://photos.app.goo.gl/QwhpbtSqBieHMprB3

If the power draw being shown for the home in the app is real, I would think I would see an energy source or combination of sources being used to actually supply the demand.

is my hardware defective ?

Comments

  • edited May 2018
    There are a lot of devices in the home that take very large peak currents but modest amounts of power while running. Air Conditioning motors and compressors, well pumps, and pretty much anything else with a motor. Even incandescent lamps have a large inrush current for a few milliseconds. Although the app seems to show readings in five minute increments, it may well be programmed to show the peak reading during that interval, even if the peak lasts only milliseconds to a few seconds.

    Most likely everything is OK and those peaks don't represent real energy use.
  • edited May 2018
    True, I was going over what I have in the house that could be causing those peaks, but they happen every day and have almost the exact same profile and happen when no body is home, no AC,heat,stove, dryer etc. ( home in idle mode lol) the peak trend seems to follow the solar production trend curve which is piquing my interest.
    I'm a design engineer for a power converter company, so maybe I am just looking too much into this data.
  • edited November -1
    Could the peak be your Tesla vehicle automatically charging?
  • edited May 2018
    I do not yet have a Tesla vehicle, If I did then it would explain that level of power usage in my humble opinion.
    I really just wanted to see if others were experiencing similar un-explained spikes before I actually call Tesla
  • edited May 2018
    If you're a design engineer for a power converter company, I have a project for you! A decade ago I did what I called the "PriUPS" project, where I used my '05 Prius to power my house in emergencies. I didn't have solar at the time, and the industry has moved on a bit. Nonetheless, I still think there would be a need for a power converter that I conceptually specified. Any interest?

    http://www.priups.com/misc/inverter-spec.htm

    Richard
  • edited May 2018
    @cookfamilly The only time I see spikes that high are when the water heater turns on during heavy usage. But I'm concerned with how often they are that high when no one is home and how long of a duration they are having. for me to get a spike that high I have to have a shower running, dryer running, AC on, and stove on. I would look at the water heater first and then call Tesla and see if they might be able to help track down the issue.
  • edited May 2018
    There are devices that can be put in your circuit box that will measure the invidual circuits. This is troubling.
  • edited May 2018
    do you have the ac/hvac system on keeping your house a constant temp? If not then It can also be your frig as it attempts to keep your food cold and freezer frozen. If your house temperature warms during the day then cools at night, then you would get those draws on the same curve line as the sun projects on your house. If you run a nest that turns off cooling/heating when your not home, the fridge would compensate because it needs to maintain a specific temp.
  • edited May 2018
    Thanks for the ideas everyone.
    1. I have a tankless water heater, gas powered
    2. last night I was thinking it oculd be my central AC & Nest keeping my house cool as the sun rises etc, this kinda explains the spike curve matching the solar production, as it shows the curve of the sun to my house during the day.

    So this morning I have shut down my AC system and un-plugged my nest off the wall ( to make sure my kids don't turn it on today) and I will take a look at the spikes today to see if they are different or similar.

    I really wish the Tesla app gave more detailed data, I realize it's eye candy suited for most people. but man, lol as an engineer I wish we had more access to high resolution data lol ( rolls eyes)

    I'll post back tomorrow with the results from today.
  • edited May 2018
    Here is the data from yesterday. https://photos.app.goo.gl/YJ8noau8NDZnlY2M2

    This was with noone home, central air disabled, no electric stove/oven operation, no laundry, no electric car, gas powered tankless water heater.

    The duration of the peaks is over minutes. I'm not sure why 1 of the other 3 energy sources are not filling in the demand for those peaks. They must not be real. Time to call the big T
  • edited May 2018
    Have you tried turning the Powerwall to backup-only mode for a day to see if your electric meter reports the same spikes? Measurement error does seem to be the most likely explanation, but that might confirm it.
  • edited May 2018
    @cwied That is a good idea, ill give that a shot for a day
  • edited May 2018
    With the powerwall set to 100% backup only, the large spikes have gone away ! and looks like what I would expect to see. Time to call Tesla and have them fix that.
    https://photos.app.goo.gl/ZfP53XTZuGwtmdrw2

    https://photos.app.goo.gl/oXl7hXjx2vsDIDnI2


    This is when I shut the Power Wall to backup only after 12:00
    https://photos.app.goo.gl/KeL3WXmCk2XhcmTN9
  • edited May 2018
    Hi David, You're getting weird spikes in the early am from the solar. That should not happen. Call Tesla for sure.
    Good Luck
  • edited June 2018
    That screen shot of your app is very strange looking....solar doesn't usually come in a smoothe sine-wave curver like that, it spikes during 10am-2pm or so, and then the panels should go into an idle mode that goes on and off to keep the battery topped off, if you are running basically on the battery. The graphs look very strange compared to what I see on my android using the Tesla app. I assume yours is up to date?
  • edited June 2018
    excuse my spelling!
  • edited April 2019
    Having this same issue, what was your solution @cookfamily ?
  • @cookfamilly_98262292 - What was the resolution for this? I just had panels and Powerwalls installed and am seeing similar (but higher .. like 15-18kw peaks) spikes with no explanation as to what is causing them. The Tesla engineers were out for inspection today and seemed to think this is "normal." I don't.
  • You seem to have some strange measurements even with 100% backup (e.g. solar production during the night with offsetting power returned to the grid). I suspect one or more of the power measurement clamps are incorrectly installed or are malfunctioning. When my system was first installed the clamps measuring grid power at the meter were reversed which had a similar effects. I think there is also the possibility of incorrectly polarizing the measurement within the gateway so that would be another place to check.
  • Looking at your plots, the drops to zero are puzzling to me as well. There's almost no way your household usage ever drops to zero. That would, to me, indicate either a measurement or a reporting of measurement issue.
    I suspect you'll have a very hard time getting them to really see the issue and admit there's a problem, but I'd call Tesla, if mine was doing that, and explain logically that spikes and drops to zero for home consumption do not make logical sense. Hopefully they'll send a tech out to investigate.
Sign In or Register to comment.