Forums

Rev 4.2 Downloaded Early Sunday

Rev 4.2 Downloaded Early Sunday

Well, we now are running rev 4.2
So far the changes have not been obvious in driving. Will update as we discover interesting differences from 4.0. Love to hear from those that see or know what we might be looking for in the latest update. It does feel really cool that all this happens while I and the car are " sleeping". VIN 2859, 85std with most options

GoTeslaChicago | 24 January, 2013

"Theresa | JANUARY 24, 2013
nick, Note that I had port lights and dash indication voltage and current but no mileage charging with the 110 volt adaptor. That tells me that I was indeed fully inserted. And I would be really surprised if after over a month I would suddenly not be inserting the charger correctly when I never had an issue with it until last night."

Theresa,

When my Model S was charging on 110 volts, outside in the Chicago cold the last few days, it effectively showed 0 miles because it was (apparently) using all the juice to keep the battery warm and almost nothing was available to charge the battery. Is that possible in your case?

LazMan | 24 January, 2013

Is updating via Wifi coming any time soon? I have wifi in my garage. Seems to me, that would be much faster and more reliable than 3G.

Brant | 24 January, 2013

I was hoping 4.2 would fix my rain sensor issue (not reliable or consistent so pretty much useless)
I think I see some improvement but not enough, even on the "high sensitivity" setting
maybe with 4.3?

docdac | 25 January, 2013

My sunroof works properly now, since v4.2 downloaded last night!

mkh1437 | 25 January, 2013

I was finally updated to 4.2 (1.19.42) last night! If you are still running on 1.15.x and wondering why you haven't been updated yet, as someone suggested, if you ask Tesla to push the update to you, they apparently can. (I guess it probably depends on whether they want to or not).

When I had asked about pushing an update earlier (when 4.0 had just come out), I was told that the rollout is automatic. Since 4.0 was rather buggy, they probably didn't want to push it out to any more cars, in favor of waiting for the next update. Now that 4.2 is out and perceived to be less buggy, they must be OK with pushing it out on request.

I just emailed Ownership@teslamotors.com and said that I was still running 1.15.14 and would really like to see some of the improvements in 4.2, and asked if there was any way they could push the update to my car. About an hour later, I went to check the car, and the update was waiting!

Now, that said, it could be pure coincidence that the update happened to come just as I asked about it. Either way... 4.2 installed without a hitch, and now my car greets me every time I come near with the key fob! :-)

Theresa | 25 January, 2013

GoTesla, I doubt it as I was charging the same location as always (in my unheated garage) and the temps were actually a little higher than the day before. Also my initial experience was using the 14-50 plug which should have plenty of power to provide some charge even if heating the batteries. I live in Iowa so my temps are about the same as yours currently. I think it was just a glitch. I just wanted to post so in case it happened to others they would at least be aware it could happen and they would have a clue as to how to cure it.

mkh1437 | 25 January, 2013

One other thing I have noticed with 4,2 which I haven't seen specifically detailed anywhere else... the door handles seem to be much more responsive. Aside from auto-presenting when you approach with the key fob, I feel like opening the door actually requires less force, or the timing is different. Previously, when the handles would only present after you touched them, I had to wait a second before pulling on the door to open it, and it just felt different. Previously, if I pulled on the door too soon, it would not open and then I would have to push the handle back in, push on it to extend it again, and try again.

Now, as soon as I pull on the handle, I hear it unlatch and it opens immediately. Perhaps it is just the fact that the handles are extended for several seconds before approaching, but it feels like something more than that, like the sensitivity to tugging on the handle has improved.

Regardless... I like it.

nickjhowe | 25 January, 2013

@mkh1437 - not sure if the handles thing was 4.2 or 4.0; anyhoo...I noticed the same thing and just asked @Rod to remove a request from the Prioritized Software List to remove the delay when opening the door - seems like Tesla fixed it.

William9 | 25 January, 2013

I've updated from 1.15,14 to 4.0, then 4.0 to 4.1 (1,19.31), then finally from 4.1 (1. 19.31) to 4.2 (1.19.42). The first two updates took about an hour, and the last just 30 minutes. How long is the update taking going from 1.15.14 directly to 4.2 (1.19.42)?

markapeterman | 25 January, 2013

Anyone know the source of all the clicking during the updates?

mkh1437 | 25 January, 2013

@William9, my update was from 1.15.14 to 1.19.42 (4.2). I did start out watching the update, and as reported elsewhere, the car goes through a number of gyrations, clicking, whirring, flashing headlights and rebooting of the screens. After about 20 minutes, the car went completely dark, and remained that way for about 10 minutes. I was sitting in my cold garage in the cold car, in the dark... so I gave up after about 10 minutes and went back in the house. I went back and checked on it maybe a half hour later, and it was rebooted and updated. So, It seems to have taken somewhere between 30 minutes and an hour.

mkh1437 | 25 January, 2013

Just another interesting observation... while I was sitting in the car watching the update, the screens reboot several times. At one point, I noticed that the clock on the dash screen (in front of the driver) was different than the clock on the center screen. In fact, the date was also wrong. This was last night (1/24), at about 5:00pm CT, and the dash was indicating that it was Monday January 26th, and the time was 4:36pm. So, I don't know where it was getting that date, but January 26 is not on a Monday this year. After the update was finished, the clocks were once again in sync, but it was a bit disconcerting to see it reporting a time and date that were completely different, and not even correct for the current year.

GLO | 25 January, 2013

So glad others are sitting in their cars too. I thought we were theo nly crazy ones! Don't get me wrong, I LOVE my car but we too are obsessing over little bugs and hoping to get the 4.2 update (received car with 4.1)...Lots of little bugs...

jrabena | 25 January, 2013

@mkh1473 - thanks for the suggestion to email ownership@teslamotors.com, but so far it didn't work for me (I still have 1.15.14). Instead I got back a canned, non-answer as follows:

"Thank you for contacting Tesla Motors, I hope you are enjoying your new car.

Our process for new software releases is to start slow and ramp up to include more and more cars over the course of a few weeks. The sequence and cadence at which customers receive each new release can be based on vehicle region, vehicle equipment, and many other factors. Tesla's goal is for all Model S customers is to receive new software within a few weeks of its first distribution.

I would anticipate complete rollout to be implemented sometime in the near future, so expect it soon. Congratulations again on your Model S!"

mkh1437 | 25 January, 2013

I guess this is another example of inconsistent information from Tesla depending on who you ask. :-(

Brian H | 25 January, 2013

mkh;
Your car was briefly reporting on a parallel universe. Full access will be available in release 100.0 -- or thereabouts. It will be called the Gay Deceiver update.

smd | 25 January, 2013

I pas pushed the option to update to 4.2 and I tried to do that last night by scheduling it at 2 AM as the update was set to when it came to me. This morning, I was still on 4.1. My previous update from 4.0 to 4.1 overnight went without a hitch. The best that I could figure is that I still has sleep mode active on my car and it went into that and never started the update at 2 AM as scheduled. Did anyone else have this happen to them? I guess I'll try again tonight and leave sleep mode OFF.

Brian H | 25 January, 2013

Interesting! Sounds reasonable. Let us know if it works.

KevinR.co.us | 25 January, 2013

@Jim2855 Same experience. Was set to install at 2 AM this morning & did not. I wondered about the sleep function also. I did the install now option about 20 minutes ago...will post when upadte is complete.

KevinR.co.us | 25 January, 2013

<45 minutes to go from 4.1 to 4.2

jat | 25 January, 2013

This is still early, as I have only used 4.2 for one day, but I twice I had issues with the door handles today.

The first, I walked up to the car and it didn't present the door handles. Pushing on them didn't help either (which has always worked before), and I was fumbling for the key fob and they finally presented before I could try the fob (about 10s after I walked up to the car). The car also took a long time to go to the "ready" state, as I had to press and release the brake several times to get it out of "Car off", and I had never seen that before.

The second time, I got out of the car, opened the back door to get my backpack out, and then closed that door with the driver's front door still open. That door retracted but all the others didn't. I walked away, and the car never locked/retracted the handles. So, I pressed the key fob and nothing happened besides flashing the lights. I tried pressing just the LR door, and it wouldn't extend the handle. I closed/reopened several times, tried the fob several times and it didn't change. Finally, about the 4th time when I used the fob it retracted the other door handles.

So, on a very small sample size, I have had far more troubles with door handles with 4.2 in one day than I had the 2.5 weeks prior on 4.1.

TiburonTesla | 25 January, 2013

I picked up my P85 with 4.1 installed on 12/31/12.
Yesterday I was notified 4.2 is ready to install.
I just clicked the install button and it took about 30 min to complete.

Not sure of any big improvements yet, but I never really had most of the issues I've read about. I did have the odd windshield wiper which would wipe just one time occasionally when I'd open the driver door. And there was occasionally some glitchi-ness with the door handles refusing to present themselves. But it was mostly minor..

Taking my son o the track tomorrow. I'll report any differences I notice.

P.s. anyone in NorCal start a tesla car club yet? Let's meet up at Infineon and get a little track time?!

HaroldS | 25 January, 2013

After 4.2 installed the door handles are behaving erratically, whereas previously they worked flawlessly.

Now they don't present about 1/3 of the time. In addition, as soon as the driver sits in the car the other handles retract, so passengers are left standing outside. The dash icon shows the car still unlocked, but the control panel "Unlock" has to be pressed to make the handles extend again.

I notice that the voice command function now gives an error message if there is no connectivity. I am not sure, but previously I believe that the car accepted the command, even though it couldn't execute it -- at least I had not seen that error message before, and we drive in areas with no connectivity often.

nickjhowe | 25 January, 2013

@Jat/HaroldS - I'm on 4.2 and not seeing the door handle issues you are. I've had a couple of instances where the door handles wouldn't present automatically, but I think that was more to do with the car not sensing the fob than any particular error.

reitmanr | 26 January, 2013

Surprised to see there will be a download/upgrade from 4.2 tonight at 2PM. We just got 4.2 last weekend. Well, life is full of surprises. Since everything is working, sure hope it still does tomorrow morning. Maybe we will have the mobile app! OK. It's late and I am wiped. Delusionsal.

Brian H | 26 January, 2013

2 PM is night? What's the sun doing so high in the sky?

dtaubert | 26 January, 2013

I also got 4.2 (1.19.41) last weekend and received a new update yesterday. It is 1.19.42, which is still 4.2.

nickjhowe | 26 January, 2013

@reitman - did you you know that you can change the time to anything you want, or even install immediately?

reitmanr | 26 January, 2013

Brian H
Ah, night and day, you are the one.

reitmanr | 26 January, 2013

nickjhowe
Thanks. Yup. Just wanted to be surprised in the morning.

nav66 | 26 January, 2013

My observations: having had no discernable problems under 4.1, had our first glitch the next day after the overnight download of 4.2. While driving in a 25 mph zone, where i had set cruise control to 25, I manually disengaged cruise control. A moment later, i attempted to re-engage, but instead got a yellow triangle error message telling me cruise control would not be available until i restarted the car. didn't realyply get a chance to do that, since we were in traffic, and on the way home. Once parked in our garage, I shut off the car, restarted, and error disappeared. Going to drive it to Half Moon Bay today, and will put it through the paces.

Anybody else notice this error?

jat | 26 January, 2013

Sorry, I assumed I was running 4.2 after I got the dialog and told it to install at 2am, but today I checked and it is still running 4.1. So, never mind about the door handle issues with 4.1 (unless it is a result of a failed upgrade).

Anybody know how to get the 4.2 upgrade after it failed to install at the scheduled time? I don't see any way to check for updates/etc.

welockett | 26 January, 2013

@jat: You can select the "clock" icon next the "T" on the UI and the update window opens. You can then select the time for the update, or select the "Update Now" button.

mkh1437 | 26 January, 2013

There is no way to make the car check for updates. Some have had some luck in requesting Tesla to push the upgrade to their car. I received the 4.2 upgrade within hours of emailing ownership@teslamotors.com and asking if they could push it to my car. Perhaps it was coincidence.

KevinR.co.us | 26 January, 2013

As previously posted, 4.2 did not install for me at 2 AM (Car was probably in sleep mode). I did "install now" yesterday after getting home. It takes about 30 minutes. No issues with 4.2 (sleep function is gone). Haven't had a chance to test the smoother acceleration in the release notes.

rd2 | 26 January, 2013

Anyone know the difference between 4.2 (1.19.41) and 4.2 (1.19.42) in terms of features? I received the first software update over a week ago, but then last night I was upgraded to 1.19.42. Release notes are identical to prior update though. Anyone have any insight into this most recent version?

nickjhowe | 26 January, 2013

@Nav66 - I had that cruise control problem once while running 4.0

nav66 | 26 January, 2013

@nickjhowe - We ran the car over 130 miles today, used cruise control in a variety of driving conditions and speeds, and all went well. Hopefully, that was our one glitch....

nickjhowe | 26 January, 2013

It happened to me just the once. No idea what caused it - seemed to come completely out of the blue. As you say, hopefully a one off glitch, but happening on two cars makes it a bug rather than a glitch.

Robert22 | 26 January, 2013

I don't miss much about 4.1, but I do miss the reduction in overnight range loss. Putting the vehicle displays to sleep usually only cost me about 4-5 miles a night. The temperature here has been between 18 and 25 degrees for the last week. Last night I lost 12 miles. I was a bit surprised, but it was about 17 degrees in the garage so with battery heating and display drain I guess it's to be expected. I'll be happy when the sleep function is ready for prime time again.

kelly | 26 January, 2013

@MitchellK

VIN 595 had the car for 3 months now and yes, virtually flawless. I too was bothered when I didn't get the latest updates, but when I heard about the problems and spoke to my local service center, they suggested I hold tight on the old software version until it was clear the bugs were worked out. Apparently most of the problems were/are happening to those receiving the upgrade via remote download (as opposed to factory installed). Anyway, I'm so pleased with how well the car has performed and know the upgrades will come eventually (and hopefully bug free)!

suegie | 26 January, 2013

I'm a software tester for a living, so having my Model S is like having a computer that comes with a very fine car! That said, I think Tesla should have a place on "My Tesla" that shows what the update included. It would give me something to do while the update is taking place! It's like opening a new gift every time we get a new update! What's in the box!!!????

Brian H | 27 January, 2013

Robert;
Since the car is garaged, can't you plug in and trickle-charge at low amperage and eliminate loss and power/regen limitations on starting?

dtaubert | 27 January, 2013

@rd2 - I noticed that my VIN number wasn't displaying properly in the Tesla dialog with .41 but was with .42. Haven't noticed anything else...

Brian H | 27 January, 2013

dtaubert;
Glad to see you now have in VIN-o veritas. Let's all raise a glass to 4.2! ;)

davidcjones | 27 January, 2013

VIN 00055 is still on 1.15.14. Sigh. I am not surprised at a "rolling" roll-out of the software, but when I see certain vehicles getting multiple updates while some have none, that seems funny unless they are being preferentially re-updated to patch bugs in a prior update.

rd2 | 27 January, 2013

Thanks dtaubert!

I haven't really noticed anything new so far. I have had some connectivity issues with my iPhone throughout the last month, so maybe those will start to go away now... I hope. Otherwise, no problems with newest 4.2. Took it on a 90mi roundtrip with multiple errands today and no door handle or window issues.

ThomasK | 27 January, 2013

My walkaway lock does not work... It looks like it works, because the lights go off and the door handles retract, but my son ran a block ahead of me and was able to open the rear passenger door without my key. So I tested it, and yup, the car is fully unlocked. I put up another thread, but I might suggest you all test it, just in case... I've been using the key fob, pressing ONCE (I learned that on this forum) to lock the car. Calling Tesla tomorrow...

ThomasK | 27 January, 2013

My above post relevant cause walkaway DID work prior to upgrade. Also, I don't know if this was related, but for a day or so the passenger rear door driver side would not open from the outside - the LED would not light up, and the door would not open with the usual touch.

DouglasR | 27 January, 2013

@ThomasK

How can the door be opened if the handle is retracted?

Pages