Forums

Micro SD Card not recognized

Micro SD Card not recognized

Hi,

I bought a microSDXC Card (SanDisk 128GB High Endurance Video) + microSD Card Reader (SanDisk MobileMate USB 3.0). I did the formatting of the card to FAT32 (I'm using a Mac), created the TeslaCam folder. But when I plug it, either dashcam and sentry mode is not working. If I used my old flash drive, it's working correctly.
I tried to do the formatting a few times with the same result. The MicroSD card is working, as I've been able to transfer a file on it and read it correctly.
Any idea why my car doesn't recognize it?

EVRider | 2019年10月16日

Verify that the format is actually FAT32 and make sure there’s no typo in the folder name. If everything looks right try rebooting.

NKYTA | 2019年10月16日

...try rebooting WITHOUT it plugged in, yes @EVRider?
:-)

TeslaTap.com | 2019年10月16日

@davoliver - On the mac, are you using the same adapter to format and set the folder name? Not sure it should matter, but if you're using some other holder for the SD card on the Mac, it could be the adapter is not working properly.

jimglas | 2019年10月16日

GUID mapping?

EVRider | 2019年10月17日

Doesn’t matter if you leave a non-bootable USB inserted when rebooting. GUID mapping vs. MBR shouldn’t matter either.

I have noticed that V10 sometimes “loses” my music USB, and I have to remove and reinsert it to fix it. That could be happening with the video USB also, though I haven’t noticed that happening to me.

davoliver | 2019年10月21日

I tried the rebooting without it plugged in and it worked :) Thanks for your help!

TeslaTap.com | 2019年10月21日

@NKYTA - Good suggestion - added it to my dashcam troubleshooting list. Here's the latest list I have: https://cammem.com/tesla/troubleshooting/

davoliver | 2019年11月3日

It actually worked once, then stopped working again. Every time I reboot the car with the stick unplugged, it works once and stops working :(

TheMorgans | 2019年11月4日

I have a San Disk Ultra micro SDXC UHS-1 128GB that has been formatted correctly on a PC using several downloaded programs Tests confirm it is working correctly. When used with the dash Cam it is not recognized. A San Disk 128GB flash drive is recognized.

Don

Kingb3 | 2019年11月27日

I have the same card. Windows 10 will only give you the options for larger capacity cards to format in exFAT or NTFS. I tried the exFAT format and that didn't work. Ended up formatting using AOMEI Partition Assistant (free), added the TeslaCam folder after format and all was well. I believe there is also a Windows command line that will format to FAT32 (I did not try this and am not responsible for outcome): format /FS:FAT32 /Q X: (X: being the drive letter of the card you want to format)